Standard gas springs should always be mounted rod down to prevent premature seal failure and in addition to provide end of stroke damping. It is also recommended that gas springs are mounted in pairs to prevent side loading.
Please see our Typical Applications page for information on gas spring applications, including a link to our ‘Application Enquiry Form’ where we provide a service to aid in the mounting of gas springs on your application.
Please see our Downloads page to view our range of literature that you may download.
If you send the details on your current parts to us we will look to match your gas spring as closly as possible using the information given, for a better match please send us a sample of your gas springs and we will use our in house testing equipment to collect detailed information on your current gas springs. Using this information we can produce a gas spring that will fulfill all of your needs.
We can print alternative symbolising on our gas springs, this includes different part numbers and different artwork. The symbolising must contain the health and safety information, as well as the parts’ batch number and the date stamp to allow tracability of the parts. To discuss the symbolising options available to you please contact one of our gas spring experts at +44 (0)116 274 3600 or email email@example.com.
Our carbon steel gas springs come as standard in a black satin finish and our stainless steel gas springs come in a natural finish. White is a popular colour for Blocklift gas springs and white is also available for our stanadard carbon steel gas springs.
We manufacture gas springs in a large range of batch sizes, our standard minimum order quantity is 50 pieces. However, talk to us about your requirements and we’ll see what we can do. We do have distributors who are able to supply batches smaller than 50 as well as distributors that stock a standard range of parts that can be ordered straight off the shelf.
Unfortunately we do not offer a selection of standard gas springs that we keep in stock available for instant despatch, as every gas spring we manufacture is custom designed and made to your bespoke requirements. We do however have a standard range of parts available through our distributors. Please refer to our distributor page to contact your local distributor.
The most recommended end fitting available to be used on a gas spring is a ball joint, as this gives the gas spring a large degree of freedom to move around and prevent the gas spring from being side loaded.