Help Centre

We’re here to answer all your questions around the correct application of gas struts and dampers. From key terminology, an introduction to gas struts and our series of how to videos, to selecting the right product, sizing, customisation and our range of FAQs, our Help Centre contains all of the information you’re looking for. You can also ask an expert through our adjacent contact form, with our designers and engineers on-hand to answer questions specific to your product or application.

Click here to download and complete our Gas Spring Sizing Form or here to download our Gas Spring Application Enquiry Form and submit either when completing our Ask The Expert form to help our designers and engineers with your query.

Ask The Expert


I agree to be contacted by a member of the Camloc team using the details provided. Details will not be shared with third parties.

Menu
  • Getting Started
    Introduction to a Gas Spring Construction of a Gas Spring Gas Spring Terminology Forces and Spring Rates Gas Spring Standards
  • Selecting The Right Product
    The Two Key Questions Standard Gas Spring Sizes Which Product is right for me? Technical Data
  • Customisation
    Tailoring your Gas Spring
  • Want to Know More?
    Do’s and Don’ts Mounting Position Terminology Mounting Orientation Mounting – Other Considerations Mounting – Practical Considerations Whitepaper – Understanding the Basics Whitepaper – Gas Spring Overview Whitepaper – Gas Spring Overview (Part 2) Whitepaper – Gas Spring Mounting
  • Show Me How
    How to fit and de-gas a Vari-Lift valved gas spring (gas strut) Stop & Stay Multi-Positional Gas Springs Cam-Stay – Multi-Positional Telescopic Stay
  • Troubleshooting
    Frequently Asked Questions
  • Datasheets
    General Range Overview Camloc Motion Control ISO 9001 Certificate Gas Spring Application Enquiry Form Vari-Lift Instruction Safety Leaflet Gas Spring Disposal Advice MSDS Gas Springs Ref:112 MSDS Blocklifts Ref:126 MSDS Dampers Ref:125

Mounting Position Terminology

There are two mounting points for a gas spring, the ‘fixed’ and ‘moving’ mounting points. As the names suggest, the fixed mounting point remains fixed, whereas the moving mounting point rotates through an arc as the application opens and closes. 

As a rule of thumb when positioning a gas spring Camloc start with the moving mounting point approximately 1/3 the length of the lid from the hinge as shown below: 

 

Mounting 2.0 Figure Two 300x241 - Mounting Position Terminology

 

This provides an extremely rough guide as to where to place a gas spring, but if this is developed further it will also give an indication as to the size of the spring required. 

Contact Us Today

From our base in Leicester, UK, we design and manufacture quality-engineered solutions in motion control.

At Camloc, we are more than just a manufacturer of Gas Springs and Dampers.