Help Centre

We’re here to answer all your questions around the correct application of gas struts and dampers. From key terminology, an introduction to gas struts and our series of how to videos, to selecting the right product, sizing, customisation and our range of FAQs, our Help Centre contains all of the information you’re looking for. You can also ask an expert through our adjacent contact form, with our designers and engineers on-hand to answer questions specific to your product or application.

Click here to download and complete our Gas Spring Sizing Form or here to download our Gas Spring Application Enquiry Form and submit either when completing our Ask The Expert form to help our designers and engineers with your query.

Ask The Expert


I agree to be contacted by a member of the Camloc team using the details provided. Details will not be shared with third parties.

Menu
  • Getting Started
    Introduction to a Gas Spring Construction of a Gas Spring Gas Spring Terminology Forces and Spring Rates Gas Spring Standards
  • Selecting The Right Product
    The Two Key Questions Standard Gas Spring Sizes Which Product is right for me? Technical Data
  • Customisation
    Tailoring your Gas Spring
  • Want to Know More?
    Do’s and Don’ts Mounting Position Terminology Mounting Orientation Mounting – Other Considerations Mounting – Practical Considerations Whitepaper – Understanding the Basics Whitepaper – Gas Spring Overview Whitepaper – Gas Spring Overview (Part 2) Whitepaper – Gas Spring Mounting
  • Show Me How
    How to fit and de-gas a Vari-Lift valved gas spring (gas strut) Stop & Stay Multi-Positional Gas Springs Cam-Stay – Multi-Positional Telescopic Stay
  • Troubleshooting
    Frequently Asked Questions
  • Datasheets
    General Range Overview Camloc Motion Control ISO 9001 Certificate Gas Spring Application Enquiry Form Vari-Lift Instruction Safety Leaflet Gas Spring Disposal Advice MSDS Gas Springs Ref:112 MSDS Blocklifts Ref:126 MSDS Dampers Ref:125

Do’s and Don’ts

Here is a list of a few things we recommend when designing your application and mounting our gas struts:

Do mount our gas struts in pairs to prevent side loading.

Do mount our gas struts rod down to ensure that the main rod seal is well lubricated at all times, this ensures that the oil is in the correct position to allow you to benefit from our end of stroke damping. When releasing pressure from your Vari‐Lift gas springs, always let the gas out in small amounts, that way you are less likely to de‐gas the struts past the pressure you require. It is recommended that during storage gas springs are kept rod down.

Do ensure that all of our end fittings are fully screwed down onto the gas springs as this will reduce the chance of the threaded studs being broken off during operation.

Do use ball joint end fittings wherever possible as this will reduce the risk of side loading the gas springs. Whenever using ball joints ensure the ball joint studs are screwed in to the application all of the way up to the spanner flats.

It is always recommended when a heavy object is being lifted up to allow an operator to gain access underneath it, that an Econoloc gas strut is used. This is to ensure the operator’s safety in the event that the gas springs are overloaded or misused.


And a few things we recommend that you don’t do with our gas springs:

Do not apply solvents to the gas struts as this can wash the lubricating oil off the piston rod and also degrade the seals, which can cause the seals to fail prematurely.

Do not paint the gas struts as this could transfer onto the piston rod which may pass the main rod seal of the gas spring and cause the seals to fail.

Do not grip the piston rod in any way as grooves or damage can cause oil and gas to leak out of the gas strut.

Do not apply anything to the piston rod as this can cause the main rod seal to fail during cycling.

Never pierce or heat gas springs as they act as a pressure vessel. When used correctly and manufactured to our strict manufacturing and engineering procedures, gas springs are very safe.

Contact Us Today

From our base in Leicester, UK, we design and manufacture quality-engineered solutions in motion control.

At Camloc, we are more than just a manufacturer of Gas Springs and Dampers.